7kw 7500W gasoline generator electric start Three-phase generators
Product features
01. Portable compact open structure
02. Long run time - up to 8 hours
03. Overhead valve (OHV) design,low operating temperature,low rate of wasting oil
04. Automatic alarm set-it starts when the machine is in low oil level, which can prevent the generator working under low oil level so as to give the machine a better protcetion.
05. Cast iron cylinder liner design, which effectively improve the lubrication, and making the engine more resistant to wear.
06. Forged crankshafts design- reliable and durable
07. Economical-we have our own factory and be capable of offering you a lower price than other company.
parameter
Model No. |
EYC8500E |
|
Genset |
Excitation mode |
AVR |
The prime power |
8.0KW |
|
The standby power |
7.5KW |
|
Rated voltage |
230V/400V |
|
Rated ampere |
32.6A/10.8A |
|
frequency |
50HZ |
|
Phase No. |
Single phase/Three phase |
|
Power factor (COSφ) |
1/0.8 |
|
Insulation grade |
F |
|
Engine |
Engine |
192FE |
Bore × stroke |
96x66mm |
|
displacement |
440cc |
|
Fuel consumption |
≤374g/kw.h |
|
Ignition mode |
Electronic ignition |
|
Engine type |
Single cylinder, 4 stroke, air cooled |
|
Fuel |
Above 90# lead free |
|
Oil capacity |
1.1L |
|
startup |
Manual/Electric Start |
|
Other |
Fuel tank capacity |
25L |
continuous running hrs |
8H |
|
Battery capacity |
12V-14AH free maintenance battery |
|
noise |
75dBA/7m |
|
size |
730*545*595 |
|
Net weight |
88kg |

Simple starting steps for gasoline generator
1. Add engine oil to the engine; add 92# gasoline to the fuel tank;
2. Turn the fuel switch to the "ON" position and open the throttle.
3. When the cold engine is started, close the carburetor choke and push it to the left (do not close the choke when the hot engine is started again after it has been stopped recently to prevent excessive fuel from making it difficult to start);
4. Close the carburetor throttle appropriately; set the gasoline engine ignition switch to the "ON" position.
5. Start by hand pull cord or electronic ignition with key
After starting, open the damper; generally push it to the right.
Run the generator for 3-5 minutes, turn on the power and load!