Jenereithara ea 25kva welder 500A Matla a Diesel Arc Three phase Weichai powe
Tlhaloso ea Sehlahisoa
1. Motlakase oa Motlakase o tiisa ho qala habonolo
2. Arohane tjheseletsa mefuta e fapaneng le phetoho e ntle ka mong le e mong mefuta e fapaneng
3. Ts'ebetso e kholo ea Welding
4. Matla a thusang ha o cheseletsa
5. 500 Amperes tlhahiso e loketseng 1.6 ho 8.0 mm Air Carbon Arc Gouging le Stud Welding
6. E amohela thekenoloji e tsoetseng pele ea li-inverter soft switch, thekenoloji ea taolo ea PWM, le thekenoloji e fosahetseng ea ho laola maikutlo, e natefeloa ke boleng bo phahameng ba matla le ts'ebetso ea welding ka har'a mefuta e feletseng ea taolo ea motlakase / ea hona joale.r
Sistimi ea taolo:
1.Automatic alarm system: unit e na le mochine oa alamo oa acousto-optics le ho ts'oara boemo leha e le bofe ha ho hlōloa ha qalo, metsi a feta mocheso, oli e hula fatše, ka lebelo, ka mojaro le ho feta hona joale.
2. Pontšo ea ts'ebetso:
a) Li-voltage tsa yuniti, ponts'o ea motlakase oa mekhahlelo e meraro le maqhubu
b) Mocheso oa metsi, pontšo ea khatello ea oli
c) Boemo ba mafura, pontšo ea mocheso oa mafura
d) Mabone a alamo a utloahalang le a bonoang le li-buzzers
mekhahlelo
Mohlala No. | AXC1-500A | |
alternator | Mokhoa oa ho hlasimolla | Boikemisetso ba ho ithabisa ka bo-brushless |
Matla a maholo | 30KW | |
E lekantsoe khafetsa | 50Hz | |
RPM | 1500r/min | |
Matla a lekantsoeng | 400V | |
Mokhahlelo & khokahano | Khokahano ea naleli ea 3 phase | |
Boemo ba ho itšireletsa | H | |
Sireletsa kereiti | IP23 | |
enjene | enjene | WP2.3D33E200 |
Matla/h | 30KW | |
RPM | 1500r/min | |
E qalang | Motlakase oa DC12V | |
Mofuta oa enjene | Inline, ente e tobileng, metsi a pholile | |
Mokhoa oa ho kenya | Turbo e qositsoe | |
setorouku | 4 | |
Nomoro ea Cylinder. | 4 | |
Bore x stroke | 89*92 | |
Taolo ea ho laola | 'Musisi oa elektronike | |
phalliso | 2.289L | |
tshebediso ya mafura | ≤200g/kWh | |
Bokhoni ba tanka ea mafura | 100L | |
Tšebeliso ea oli | ≤1.5g/kWh | |
jenereithara | makhetlo a mangata | 50Hz |
Matla a lekantsoeng | 400V | |
Matla a maholo | 20KW | |
Matla a standby | 22KW | |
E lekantsoe ampere | Mokhahlelo o mong le o mong oa 26.0A | |
Max. ampere | Mokhahlelo o mong le o mong oa 29.0A | |
Mokhahlelo No. | 3 mohato | |
lerata | ≤75dB/7m | |
boholo | 1800*900*1300mm/2500*1500*1850 (e nang le k'haravene) | |
Boima bo kahare | 610KG | |
welder | Mokhahlelo | 3 mohato 380V 50Hz |
E lekanyelitsoe ho kenya ampere | 36A | |
Matla a kentsoeng a lekantsoeng | 24KVA | |
rated tjheseletsa A/V | 500A/36V | |
Welding ampere | 500A60%DE | |
400A100%DE | ||
ha ho matla a motlakase | 67±5V | |
ampere set range | 20-400A | |
Katleho | ≥85% | |
Ntho ea matla | >0.95 | |
Boemo ba ho itšireletsa | F | |
Sistimi ea ho pholisa | Moea o phodileng | |
Mophato wa tshireletso | IP21S | |
Melemo ea Sehlahisoa
Mochini o le mong o sebelisoang habeli: ho amohela theknoloji ea ho tjheseletsa ea motlakase ea licylinder tse ngata tse pholileng ka metsi, e hlileng e fihlelang tlhahiso ea matla le tjheseletsa. Tšebeliso e habeli, ts'ebetso e ntle haholo, e ka fihlela katleho e ntle ea litšenyehelo, e u fa monyetla oa ho thabela melemo e mengata ea moruo.
Moralo o bobebe le o mokhuts'oane o ntlafatsa ts'ebetso ea mochini sebakeng sa marang-rang mme o boloka nako e ngata
Tšebeliso e lumellanang: Ka ts'ebetso e ntle ea mojaro, matla a ka fanoa ka nako e le 'ngoe nakong ea welding. Ts'ebetso ea welding ha e ame motlakase le sebopeho sa maqhubu a tlhahiso ea motlakase, ka hona, e ntlafatsa ts'ebetso ea ts'ebetso, e etsa hore ho be bonolo ho e sebelisa le ho sebelisoa haholo.
LBH
A) Nka fumana sampole joang?
Pele re fumana odara ea pele, ka kopo lefa mohlala oa litšenyehelo le litefiso tsa tlhahiso. Re tla khutlisa mohlala oa litšenyehelo ho uena nakong ea odara ea hau ea pele.
B) Nako ea mohlala?
Lintho tse teng: Matsatsing a xxx.
C) Hore na o ka etsa mofuta oa rona lihlahisoa tsa hau?
Ee. Re ka hatisa Logo ea hau lihlahisoa le liphutheloana haeba u ka kopana le MOQ ea rona.
D) Hore na o ka etsa lihlahisoa tsa hau ka 'mala oa rona?
E, 'Mala oa lihlahisoa o ka etsoa haeba u ka kopana le MOQ ea rona.
E) Joang ho netefatsa boleng ba lihlahisoa tsa hau?
1) Ho lemoha ka thata nakong ea tlhahiso.
2) Tlhahlobo e tiileng ea lisampole ho lihlahisoa pele li romelloa le ho paka sephutheloana sa sehlahisoa se tiileng.