Products
3KW diesel generator 230V air-cooled single cylinder 178F electric start
Applications
The working principle of a generator set is mainly a complete set of mechanical equipment that converts other forms of energy into electrical energy through a certain amount of work. In fact, its application in our daily life is very extensive. Nowadays, both enterprise production and daily life cannot do without electricity.
Product advantages
Our diesel generator, 32mm round tube support, protect the core components, make the generator more durable, special shock absorbing foot to protect the core, reduce damage.
Long term warranty; series commercial engines use high quality commercial grade accessories to make the engine more durable.
Humanization design
Integrated control panel, easy to operate, more durable industrial accessories, and can be configured for different countries of the control panel, perfect to meet the needs of users.
parameter
Model No. |
EYC4000XE |
|
Genset |
Excitation mode |
AVR |
The prime power |
3.0KW |
|
The standby power |
3.3KW |
|
Rated voltage |
230V |
|
Rated ampere |
13.6A |
|
frequency |
50HZ |
|
Phase No. |
Single phase |
|
Power factor (COSφ) |
1 |
|
Insulation grade |
F |
|
Engine |
Engine |
178FE |
Bore × stroke |
78x68mm |
|
displacement |
303cc |
|
Fuel consumption |
≤310g/kw.h |
|
Ignition mode |
Compression Ignition |
|
Engine type |
Single cylinder four stroke air-cooled, overhead valve |
|
Fuel |
0# |
|
Oil capacity |
1.1L |
|
startup |
Manual/Electric Start |
|
Other |
Fuel tank capacity |
12.5L |
continuous running hrs |
8-10H |
|
Castor accessories |
YES |
|
noise |
85dBA/7m |
|
size |
700*490*610mm |
|
Net weight |
62kg |
|
Precautions
Precautions for using small air-cooled single cylinder diesel generators:
1. First, add engine oil. For 178F diesel engines, add 1.1L, and for 186-195F diesel engines, add 1.8L;
2. Add 0 # and -10 # diesel fuel;
3. Connect the positive and negative terminals of the battery well, with red connected to+and black connected to -;
4. Turn off the power switch;
5. Push the engine running switch to the right and turn it on;
6. For the first use, hold down the pressure reducing valve above and gently pull the rope 8-10 times by hand to lubricate the oil and allow diesel to enter the oil pump;
7. Prepare well and start with the key; After starting, turn on the power switch and plug it in to power on.
When shutting down, the load should be disconnected first, the power switch should be turned off, and then the key should be turned off to shut down the machine;
Maintenance:
Change the oil after the first 20 hours of use, and then change the oil every 50 hours of use thereafter;
The load power cannot exceed 70% of the rated load. If it is a 5KW diesel generator, the resistive electrical appliances should be within 3500W. If it is an inductive load motor type equipment, it should be controlled within 2.2KW.
Developing good operating habits is beneficial for the service life of the generator set.